What should I do if the woodworking engraving machine fails?

    Woodworking engraving machines are common equipment that woodcarving artists can't live without. As with other devices, this can be a problem for a long time. What should the operator do when the engraving machine fails?
    First, turn off the power immediately to check. For example, when using a woodworking engraving machine to process products, the engraving machine has different patterns of engraving. When the violent shaking occurs, the operator should immediately stop using the machine and check whether the stepping motor of the machine is moving normally. Is there a foreign object stuck on the stepping shaft? Excluding these faults, the user can boot up for trial operation;
    Second, check the control software inside the engraving machine to see if it is infected with a computer virus. If the control program receives a virus infection, it will appear in the engraving process. At this time, computer software upgrades are required, and the system is completely disinfected.
    If the operator fails to correct the fault after checking the above two steps after discovering that the machine has failed, it is necessary to contact the woodworking machine manufacturer in time. Because of the deeper faults of the machine, professional maintenance personnel are required to carry out inspection and troubleshooting. We do not recommend that consumers disassemble and repair the machine in an unprofessional manner to avoid new malfunctions.

Engraving machine limit switch

      The engraving machine has been well known in many industries, but many of the components and functions in the engraving machine are still not understood, because the average customer consultation is how much money, what configuration, what processing, no customer will ask very detailed The problem, such as every little thing, small parts, small switches, is because the customer knows the engraving machine, so these unknown functions can't be really understood before buying. So let's talk about it today, the limit switch of the engraving machine.
 What is the limit switch of the engraving machine: the limit switch of the engraving machine is the starting point of the engraving machine stroke, and the limit switch chamber is used to prevent the engraving failure from exceeding the range of the engraving machine during engraving.

    Then understand what is the engraving machine limit switch, we say the role of a lower limit switch, the customer should apply the engraving machine engraving, try to design a reasonable engraving range, set the corresponding software software parameters; It is necessary for the market to check whether a lower limit switch is still flexible and so on. There is also the engraving path beyond the ground oh ah range, you need to set the soft limit in the engraving machine engraving software re-parameter.
 When the engraving machine goes out of the limit switch, the red alarm signal appears at this time to display the limit. At this time, it is necessary to release it with the limit, and then the machine can be used. There is also the size of the machine is the size of the machine. For example, the Z axis of the 1325 is 300. This is the same as the one above.