Woodworking engraving machine without suction solution

In the use of woodworking engraving machine, there may be a phenomenon that the suction table has no suction and cannot absorb the plate. What is the cause of this problem? How should we solve it? Today, Shandong engraving machine manufacturer introduces the woodworking engraving machine table to you. Solution:

1. Is the motor line voltage normal?

2. Whether the water circulation air pump adds less water, whether the motor is stuck or not, and the rotating shaft of the motor fan protection net is removed;

3. The filter in the vacuum pump is blocked and cleaned;

4. The surface of the counter or pipe is trimmed by air leakage;

5, forward and reverse exchange motor, any two lines change the direction of the motor.

The woodworking engraving machine uses vacuum adsorption to fix the plate, which can not only be firmly fixed, but also does not move and engrave the misalignment, etc., and the plate is fixed relative to the splint, which can save the plate and engrave to the edge of the plate. In order to better use the woodworking engraving machine, Shandong The engraving machine manufacturer reminds you that you need to solve the problem of no suction in time.

Learn about the classification of stone engraving machines

    The stone engraving machine is a high-tech automatic computer-controlled engraving equipment that can be engraved on natural stone, glass, etc. In the engraving industry, there is an application of engraving machine, which can improve the engraving efficiency. Although the machine is engraved without artificial engraving, it is also very delicate. To use the engraving machine, you need to know the classification of the engraving machine.
1. Ordinary knife type alloy knife. Made of high-performance alloy with double-edged design. The sharpness of the knife is high, cost-effective, and manual re-grinding is also easy. The disadvantage is that the angle of the knife is not standard, and it is not suitable for embossing. Generally, it is made of bluestone and marble.
2. Standard angle alloy knife. Made of high-performance alloy material, it is also a double-edged design. The angle is very standard. It can be engraved and the fine relief effect is good. It is generally used for carving bluestone and marble, and can be customized with a sharp knife with a flat bottom.
3, smelting diamond grinding head knife. It is made of high-tech, high-precision, with good sharpness and high engraving efficiency. In the case of engraving, the cutter head will not be deformed and the engraving precision is also very high.
4, the overall alloy triangular knife. Made of ultra-fine particle super wear-resistant alloy, the wear resistance is much higher than other triangular knives on the market, the angle is also standard, and the lettering is very effective. If you have a universal knife sharpener, you can use this knife.
    There are other classifications for this engraving machine, such as PCD polycrystalline diamond knives, sintered diamond head knives and diamond knives. To understand these characteristics, you can buy them at the stone engraving machine manufacturers, and the information will be more comprehensive.