What should be paid attention to when using stone engraving machine

    The stone carving process is a traditional handicraft. In the past, the craftsmen could only use simple carving knives and chisels to process them. The processing conditions were hard to say and the processed works were relatively rough. Now there is a stone engraving machine that can engrave exquisite stone carvings. So what are the issues that need attention when using this device?
    First: pay attention to the strength of use. Although the engraving machine is an automated device, it has the greatest tolerance. For example, for the cutting of stone, the maximum cutting stone thickness is 100 cm. If it exceeds this thickness, it will cause excessive load on the machine and affect the life of the equipment. Second: use to pay attention to the frequency. The scale of the stone engraving machine manufacturers should pay attention to the frequency of using the equipment, and can not be used continuously for more than ten hours, which will affect the heat dissipation effect of the equipment. In addition, the use of the process should pay attention to the normative operation. Especially the high-end engraving machine, all the work content can be set, but the operation is more complicated, pay special attention when using.
    The stone carving process is profound and profound, and the appearance of engraving equipment can improve the efficiency of engraving and make the engraving objects more beautiful. With the engraving equipment, simple stone carving objects are more liked by people, so that this traditional art work will be carried forward in the new era and get more people's attention.

What should I do if the woodworking engraving machine fails?

    Woodworking engraving machines are common equipment that woodcarving artists can't live without. As with other devices, this can be a problem for a long time. What should the operator do when the engraving machine fails?
    First, turn off the power immediately to check. For example, when using a woodworking engraving machine to process products, the engraving machine has different patterns of engraving. When the violent shaking occurs, the operator should immediately stop using the machine and check whether the stepping motor of the machine is moving normally. Is there a foreign object stuck on the stepping shaft? Excluding these faults, the user can boot up for trial operation;
    Second, check the control software inside the engraving machine to see if it is infected with a computer virus. If the control program receives a virus infection, it will appear in the engraving process. At this time, computer software upgrades are required, and the system is completely disinfected.
    If the operator fails to correct the fault after checking the above two steps after discovering that the machine has failed, it is necessary to contact the woodworking machine manufacturer in time. Because of the deeper faults of the machine, professional maintenance personnel are required to carry out inspection and troubleshooting. We do not recommend that consumers disassemble and repair the machine in an unprofessional manner to avoid new malfunctions.