The effect engraved by the engraving machine does not necessarily meet 100% of the customer's requirements, especially if the engraved effect is not smooth enough, it is necessary to find out the reason and deal with it in time. However, when we are actually working, if this happens, it is mainly the reason for these two aspects: the engraving machine manufacturer
1. The gap between the y-axis or the x-axis of the engraving machine may also have a gap between the two axes at the same time, which causes the sway during the engraving process to cause the engraving path to be deviated and the lettering is not smooth;
Second, the linear speed of the engraving machine and the curve speed are too different, causing the engraving machine to vibrate too much when the curve is taken, so that the engraving path is deviated and the lettering is not smooth. How to solve it accordingly?
The first reason is that if the engraving machine is a round rail, it is necessary to change the rail or the slider, the action will be relatively large, depending on the reason. If it is a square rail, it is much simpler. Just adjust the up and down or front and rear sliders;
If it is the second reason, then change the speed of the line or curve, and change the value to determine the parameters of the engraving machine itself.
