Woodworking engraving machine head type

The flat-bottomed knife for CNC woodworking engraving, also called the column knife, mainly relies on the side edge for engraving, and the bottom edge is mainly used for plane polishing. The cylindrical cutter has a large cutter head end face and high engraving efficiency, and is mainly used for contour cutting, milling plane, area rough engraving, and surface rough engraving.

    The ball-nosed knife for CNC woodworking engraving has a cutting edge in the shape of a circular arc. During the engraving process of the wood engraving machine, a hemisphere is formed, and the engraving process is evenly applied and the cutting is stable. Therefore, it is especially suitable for surface engraving, and is often used for semi-finishing and surface engraving of curved surfaces. Ball knives are not suitable for milling planes.
    The cow nose knife for CNC woodworking engraving is a mixture of column knife and ball knife. It has the characteristics of a ball knife to engrave the surface on the one hand, and the cylindrical knife on the other hand can be used for milling the plane.
    The taper flat bottom knife for CNC woodworking engraving, referred to as the cone knife. Cone cutters are the most widely used in the entire engraving industry. The bottom edge of the cone cutter, commonly known as the knife tip, is similar to the column knife and can be used for the finishing of the facet. The side edge of the cone knife is inclined at a certain angle to form a slanted side during the engraving process. The structural characteristics of the cone cutter enable it to achieve the unique three-dimensional clearing effect of the engraving industry. Cone cutters are mainly used for single-line engraving, regional rough engraving, regional fine engraving, three-dimensional clearing, projection engraving, and image grayscale engraving.
    The taper ball head cutter for CNC woodworking engraving, referred to as the cone ball cutter. The cone ball cutter is a mixture of a cone cutter and a ball cutter. On the one hand, it has the characteristics of a cone cutter, and has a small blade tip. On the other hand, it has the characteristics of a ball cutter, and can engrave a relatively fine curved surface. Cone ball cutters are often used for embossed surface engraving, projection engraving, and image relief engraving.
    CNC engraving woodworking with a taper nose knife, the cone nose knife is a mixture of a cone knife and a cow nose knife. It has the characteristics of a cone knife on the one hand, can have a smaller tip, and has a finer surface for engraving and milling. The characteristics of the bull nose knife, so the taper nose knife is often used for embossed surface engraving.
    The large-headed knife for CNC woodworking engraving is essentially a cone cutter with a large cone angle. Mainly used for three-dimensional clear angle.
    Drilling tool for CNC engraving, mainly used for drilling. When the hole is shallow, you can drill with a flat-bottomed knife.

Precautions when using the engraving machine

Zhongke Machinery Equipment Co., Ltd., which specializes in producing all kinds of engraving machines, reminds users of engraving machines to use engraving machines:
1. It is strictly forbidden to use the power supply that does not meet the rated voltage.
2. Operate in strict accordance with the training requirements of the company, the processing size shall not exceed the scope specified in the instructions of the engraving machine.
3, the engraving machine is strictly prohibited super-strength, overload work!
4. After 1224 or more lead screw engraving machine is used, the gantry must be parked in the middle position to prevent the screw from falling naturally and affecting the concentricity and precision of the machine.
5. If the machine emits smoke, emits odor, noise, etc., please do not use
6. It is strictly forbidden to wear gloves.
7. Do not use corrosive liquids to clean engraving machine parts and keyboards.
8. According to different engraving materials and engraving depth, choose the appropriate tool and set the appropriate feed speed.
9. The spindle should be turned before the Z-axis positioning and engraving output of the good tool.
10, can not be destroyed or replace the original power cord, do not make the power cord excessively bent, strong pull, tied and pressed under heavy objects.
11. Do not touch the tool and the main part by hand during the working process of the machine.
12. The machine should not infiltrate the liquid, drop into the metal object, etc. After each engraving, the machine should be cleaned in time to remove the cuttings and dust, and regularly lubricate the lead bar of the lead screw bar.
13. When the engraving machine is working, the bucket of the water pump should be covered to prevent the debris from falling into the water and blocking the water pipe and the main shaft.
14. When the water-cooled spindle motor works, it must ensure that the water pipe is fixed reliably, the water source is clean, and the water flow is smooth. Otherwise, the motor will be damaged due to water leakage or water cut, and the water pipe should be replaced after aging. The coolant can be emulsion or 10# mechanical oil.
15. Before starting the machine, start the spindle motor and observe whether the rotation direction is reversed. If the rotation direction is wrong, turn off the power and stop the position of any two wires on the UVW column on the inverter after the machine stop. The motor is strictly prohibited. turn.